Draper SC1 Instrukcja Obsługi Pobierz pdf (Strona 5)

Radio Motor Transmitters

There are several types of radio motor transmitters, and here is a listing of them and when you need them. A radio motor can learn up to

twelve different transmitters.

- Single Channel Transmitter, C072.011 —This is a one channel remote for operating one shade or one group of shades. It is able to

send an up, stop, down, and intermediate stop command.

- Four Channel Transmitter, C072.012—This is a four channel remote with a 5th channel that can be used as well for operating up to 5

groups of shades in individually or 4 groups individually and as a group. It is able to send an up, stop, down, and intermediate stop com-

mand per channel.

- Single Channel Wall Switch, C112.074—This is a one channel wall switch for operating one shade or one group of shades. It is able to

send an up, stop, down, and intermediate stop command.

- Four Channel Wall Switch, C112.076—This is a four channel remote with a 5th channel that can be used as well for operating up to 5

groups of shades in individually or 4 groups individually and as a group. It is able to send an up, stop, down, and intermediate stop com-

mand per channel.

- 20 Channel Transmitter, C072.043—This is a 20 channel remote which can be used to operate 20 groups of shades. It has timer,

vacations, and other user functions that one may enjoy. A single or four channel remote is required to ﬁ rst set the motor limits before

using this transmitter.

- Chronis Timer, C072.033—This single channel transmitter is used to run radio motors at certain programmed times. A single or four

channel remote is required to ﬁ rst set the motor limits before using this transmitter.

- Chronis Lite Timer and Sun Sensor, C156.099—This single channel transmitter works as a timer, and it always has an interior sensor

which suctions to the glass. The sensor will read light outside the window and operate the shades per the light levels. A single or four

channel remote is required to ﬁ rst set the motor limits before using this transmitter.

- Dry Contact Interface, C156.100—This single channel transmitter sends out a command based on the connections made on the dry

contact inputs. This device is used for interfacing radio motors with low voltage control systems. A single or four channel remote is

required to ﬁ rst set the motor limits before using this transmitter.

- Universal RTS Interface, C156.101—This is a 16 channel transmitter which sends out commands based on the inputs of IR, RS 232,

and RS 485 that it receives. A single or four channel remote is required to ﬁ rst set the motor limits before using this transmitter.

- RS 232 Interface, C156.102—This is a 16 channel transmitter which sends out commands based on the RS 232 commands sent to it.

A single or four channel remote is required to ﬁ rst set the motor limits before using this transmitter. It is compatible with X-10.

- RTS Repeater, C072.044—This repeater plugs into a wall, and it is used to extend range of a transmitter by picking up a signal and

re-emitting it.

www.draperinc.com

(765) 987-799

Page 5 of 120

1 2 3 4 5 6 7 8 9 10 ... 119 120

Brak uwag

Draper SC1 Instrukcja Obsługi Strona 5